|
Post by Robert on Apr 26, 2014 9:29:21 GMT -7
Remember when the fuel lines had a small canister with a filter in it? They are super easy to make. Go to an electronics store (Radio Shack) and buy some very small resisters. Paint the resister aluminum, cut and bend the attached wires to fit between the fuel pump and the carb....that's it. The attached wires are long enough you can run them down to the frame or firewall mounted electric fuel pump or whatever strikes you.
You can also clip the wire off of one end of a slightly larger resister (don't cut the resister),paint the resister black and paint the wire the same as your spark plug wire color. It makes a realistic coil to attach next to the distributor.
The extra wire you clip off is good to make accelerator linkage or many other uses.
Besides the ease, they are cheap!!!!!!!!
|
|